Get started

OKIOCAM T

01

To detach the camera arm from the base, move the arm stand from side to side to gently loosen it free from the base.

02

Plug the arm into the “USE” slot of the base.

03

Lift the arm.

Adjust the position of the arm and camera head to fit your needs.

04

Tuck the cable into the cable clip to keep the tabletop clean and organized.

05

Unfold the base panel.

Expand the base panel to full size to use as a platform for placing books, papers, or other objects you want to shoot.

06

Download and install the software and the button driver.

07

When the installation completes, connect OKIOCAM to a USB port on your computer.

OKIOCAM is ready to use.

08

Press the gray button to auto-adjust focus, exposure, and white balance if necessary.

How to add arm extender

01

To detach the camera arm from the arm extender, move it gently from side to side as you pull it out. 

Fully separate the camera arm from the arm extender.

Plug the camera arm into the top slot of the arm extender.

02

Now you have a broader view to shoot wider, higher, or larger objects!

How to store

01

Lower the arm.

Push the arm back gently.

02

Detach the arm stand from the “USE” slot.

03

Plug the arm stand into the “STORE” slot. Done!

© 2019 All rights reserved BY OKIOLABS